Lindetorpsvägen 7, Stockholm, Sweden
+46-8-602 12 00
Last week at a seminar held by the Polish Asphalt Pavement Association (PAPA), Helene Odelius, Bitumen Technology Nordic Manager at Nynas, gave a presentation on how reflective cracking in pavement can be mitigated using Nynas Endura F1.
Twice a year PAPA holds a conference, in the autumn and spring, where the road administration, the Polish asphalt industry, bitumen providers and other suppliers can meet. I was there to present how Nynas Endura F1 mitigates reflective cracking. Nynas Endura F1 is a very highly modified polymer modified bitumen (PMB) that is based on a comparably soft penetration grade bitumen.
If you have an old concrete road, with some cracks in it that you want to fix, it can be very expensive to redo the concrete pavement. So instead you put down an asphalt overlay on top of the concrete. The problem is that stress of different kinds – such as thermal movement, voids under the concrete and shear stress – will make the cracks go through the asphalt layer, which is called reflective cracking. Often these cracks appear in the asphalt after the very first winter.
When using a very stiff binder in asphalt, it normally can withstand a lot of load in the summer, but not in cold weather because it is so stiff that it cracks immediately under a load. Nynas Endura F1, however, is made from a softer base bitumen and modified with a high amount of polymer so that you get a very elastic stiffness that makes the asphalt more flexible so that it can actually recover from stress. On a road paved by Skanska we have seen some very good results, with asphalt overlays that have been used for five years without the cracking going through.
It is best suited for areas where there is heavy stress of different kinds and where high road performance is particularly important. After large-scale trials in Sweden, including using Nynas Endura F1 on an E4 motorway interchange, Nynas is about to begin rolling out the product to other countries. For example, Nynas Endura F1 has been used to repave a racetrack in Norway. It has also been used in the asphalt adjacent to tramlines in Sweden, since these surfaces face extensive movement upon loading.
NYNAS® has developed a series of NYTEX® process oils to improve the performance of polyurethane polymers used in plastics and resins, offering cost efficiency and enhancing a range of everyday products that are found all around us.Read more about Producers choose Nynas NYTEX® oils to boost polyurethane polymers
Nynas Senior Technical Advisor, Dr Bruce Pahlavanpour, will continue to chair the prestigious International Electro Commission (IEC) Technical Committee 10 (TC 10) for a further three years.Read more about Nynas expert re-elected as Chairman of the IEC Technical Committee 10
By introducing NYFLEX® 2120B, a hydrotreated, very low viscosity naphthenic oil, Nynas is providing a process oil ideal for use as a printing ink distillate in heatset formulations, as well as a reliable and cost-efficient alternative to traditional silicone fluids.Read more about Nynas launches process oil for low temperature ink production and silicone fluid replacement