Nynas automotive oil news

Automotive

19/09/2016 16:29

Come hear Dr Kamyar Alavi, Senior technical advisor at Nynas AB

Come hear Dr Kamyar Alavi, Senior technical advisor at Nynas AB, on the latest changes in the refining landscape affecting plasticisers for technical rubber and on how naphthenic process oils offer renewed opportunities for EPDM compounds. At Innovations in Rubber Design. 8th December 2016 10,45 Am. The Royal Aeronautical Society, 4 Hamilton Place, London

Naphthenic rubber process oils have been used for quite some time -and with increasing success- by the tyre industry, combining high technical performance with desirable health, safety and environmental features. Their performance, however, in the technical rubber applications may not be equally known to the market, although naphthenic process oils have been used in many such applications.

In the light of changing base oil landscape and especially due to the declining availability of rubber process oils originating from so called group I refineries, the focus on naphthenic oils as suitable alternatives for the technical rubber industry has gained renewed attention. In particular, a new range of tailor-made plasticisers based on naphthenic oils has shown great potential in EPDM compounds, presenting an alternative to address the needs of the industry in terms of plasticising effect and compatibility with EPDM rubbers. In this presentation, we will show the performance and benefits of naphthenic rubber process oils in a number of different technical rubber applications, not the least in EPDM rubbers, comparing their performance to those of other rubber process oil alternatives.

Dr Alavi graduated with a M Sc degree in chemical engineering and later a PhD
degree in polymer science and technology from the Royal Institute of Technology
(KTH) in Stockholm. After spending a few years in the coating industry, working
with product development and innovation management, Kamyar joined Nynas to
support the market segments for tyre and chemical industries in 2007. After a
move for a couple of years with Nynas to Singapore, he was back to Sweden in
Sept. 2015, to hold a Senior Technical Advisor position for the rubber and TPE
industries.

TYRE & RUBBER OILS NAPHTHENICS NEWSLETTER

Naphthenics Newsletter


Get the inside scoop on Nynas specialty oils! 
Sign up here to get interesting articles, case stories and much more directly to your inbox.

Further reading

The impact of IMO 2020

The International Maritime Organization (IMO) has announced that it will dramatically lower the global limit on sulfur content for marine fuels from the current 3.5% to 0.5% as of 2020. The aim is to significantly curb pollution produced by the world's ships. Three experts reflect on what this means.

Read more about The impact of IMO 2020

NYTEX® 810 – the trusted choice

A standard process oil that can be trusted to perform well in many different applications, NYTEX® 810 is particularly useful for two important applications – antifoams and insoluble sulfur.

Read more about NYTEX® 810 – the trusted choice

New CEO of Nynas

The Board of Nynas has today decided to appoint Bo Askvik, present CFO, as interim President and CEO of Nynas.

Read more about New CEO of Nynas