Process oil news

  1. News
  2. Applications
  3. Process oils
  4. Cases
  5. Knowledge tank
  6. About us

2014-12-23 14:18

Mineral oils reduce costs for flooring adhesives

By replacing tackifier resin, mineral oils have the potential to make flooring adhesives more cost effective without compromising strength and flexibility.

The construction and renovation industries are creating increased demand for new flooring, and thanks to improvements in technology, consumers have never had such a wide variety of different materials to choose from. This has partly been made possible by the developing of new floor adhesives. However there is still scope for further improvements and Nynas is currently investigating ways in which mineral oils can help make floor adhesives more cost effective.

"The cost of resin is high, so if we can partially replace it with mineral oil while still maintaining the same adhesive properties, it can make a significant cost reduction," says Peter Kaali, Technical Coordinator for CMI & Tyre, Nynas.

Floor adhesives essentially must meet four key criteria. Its viscosity must allow for easy application, it must offer sufficient open time (the time between application and bonding), offer high adhesive strength, and enough flexibility to tolerate extension and contraction in flooring materials over time.

Through its research, Nynas gradually replaced increasing amounts of resin with naphthenic oil with varying degrees of viscosity, while measuring the four parameters above. The results showed that higher viscosity oils could be used to replace up to 50% of resin while still maintaining flexibility, open time, adhesion and strength.

"The level of oil an adhesive system can tolerate is dependent on the flooring materials and the application," adds Kaali. "However our results do indicate that it is certainly feasible to replace high levels of tackifier resin with naphthenic oils."

PROCESS OILS NAPHTHENICS NEWSLETTER

Naphthenics Newsletter


Get the inside scoop on Nynas specialty oils! 
Sign up here to get interesting articles, case stories and much more directly to your inbox.

Further reading

20 years in Argentina and Mexico

Over the years, Nynas has strengthened its position in Latin America. Initially the focus was on the electrical industry, but it now also includes lubricants, process oils and tyre oils.

Read more about 20 years in Argentina and Mexico

Nynas blasts through the boundaries

Explosives that contain highly refined oil with a low sulphur and aromatic content generate lower greenhouse gas emissions.

Read more about Nynas blasts through the boundaries

Nynas in top 1 % for sustainability

Nynas has received the coveted EcoVadis Platinum CSR rating, this puts the company in the top 1% for sustainability performance.

Read more about Nynas in top 1 % for sustainability